Skip to content
Contact form
PLEN
From the workshop

Torque Converter Rebuild in the TEMSA TS 30 Bus

Temsa is a Turkish bus manufacturer offering various models tailored to different transport needs. One of the models from the Turkish company is the Temsa TS 30 bus with an Allison 3000 transmission.

The torque converter works in every automatic transmission, including the Allison 3000. With mileage it wears and needs a rebuild: resealing and new bearings. Below we describe how that went, step by step.

Biały autokar turystyczny Temsa TS 30 zaparkowany przed nowoczesnym przeszklonym budynkiem

Diagnostics and Removal

The first stage of a torque converter rebuild is thorough fault diagnostics. In the case of the Allison 3000 transmission, the most common signs of damage are fluid leaks or abnormal transmission operation. After identifying the problem, we proceed with removing the torque converter, which involves removing the transmission and disassembling the converter housing.

Automatyczna skrzynia biegów Allison do autobusów z zamontowanym czołowym konwerterem momentu obrotowego

Repair Process

The next step is the precise removal of old seals and bearings. The mounting area has to be cleaned thoroughly, otherwise the repair will not last. At this stage, technicians usually use precision seal removal tools and special bearing pullers.

After thorough cleaning of the mounting area, we proceed to replace the seals and bearings. We use replacement parts matched to the converter's operating conditions. They decide how long the rebuild lasts.

Wieniec kierownicy turbiny konwertera hydrokinetycznego ze śladami oleju i centralnym wielowpustem

After installing new seals and bearings, the torque converter is reassembled into its housing. The next step is conducting tests to ensure that the rebuild was carried out correctly. Tests include checking for leaks, operating stability of the converter, and dynamic balancing.

Wewnętrzny zespół tłumika drgań skrętnych konwertera ze sprężynami i wieńcem śrub montażowych

Rebuilding the torque converter in an Allison 3000 takes precision, experience, the right parts and the right tools. It is a job for a workshop that works on automatic transmissions every day.

Use the contact form and we will arrange the repair details at ASB Długołęka.

Zregenerowany konwerter momentu obrotowego Allison do autobusu Temsa ze skręcaną obudową

ASB newsletter

Thank you

Book a diagnostic check

Fill in the contact form below. If you would rather call, here is the list of phones to individual departments. We call back during working hours, usually the same day. Fields marked with an asterisk are required.

How do you want to fill this in?

Which code to look for on the registration document

On the last page of the vehicle registration document there is a dense square. That is the Aztec code.

The last page of the vehicle registration document. The Aztec code is at the bottom, outlined in red.

Your vehicle

Give us the VIN, or the year and engine. Either one is enough.

We call back during working hours, usually the same day.

Scan your registration document

Point camera at Aztec code (a square with a dense pattern) on the vehicle registration document. The photo stays on your phone; we only fill in the make, model, year, engine and VIN.

Starting the camera…